Home | Contact Us| Support

 
   

 

   

 

   
 

Motorola 2860 Dial/Lease Bell Compatible 201/208 Modem

Recommended Modem for connecting into Host sites requiring the use of Bell 201c and/or Bell 208b standards.

Summary
Model# 62085153

  • Versatile transmission compatible with both Bell 201 and 208.
  • Reliable, high quality 4800/2400 bps transmission compatible with Bell 201BC/AS, and 208A/B modems

Features & Benefits

  • Auto-answer for unattended operation - also includes manual- answer, manual-call.
  • Auto-dialing utilizing bisync, SDLC, or parallel 801 protocols.
  • Convenient, user-friendly 32-character LCD allows 3-button, front-panel programming and dialing with up to 36 characters.
  • Self-testing and condition reporting to ensure smooth, uninterrupted operation.
  • EIA-232 and CCITT V.24 compatible.
  • Superior performance over unconditioned lines via advanced adaptive equalization.

Specifications

  • Operation: Asynchronous/synchronous; 2-wire, half-duplex dial or lease line; 4-wire, full-duplex, lease line.
  • Data Rates: 4800 bps (Bell 208A/B), 2400 bps (Bell 201BC/AS).
  • Transmitter Output: Dial: permissive or programmable (0 to 9 dBm). Lease Line: 0 to -12 dBm.
  • Line Interface: RJ11 voice jack or RJ45 data jack.
  • Size: 7.0 in. (W) x 2.2 in. (H) x 9.6 in. (D); Wt. 2.8 lbs. Power: 115 VAC; 10 Watts.
  • FCC Reg. #: AK3USA-75273-MD-E.
  • Cables Supplied: RJ11 to RJ45 (6 ft.); RJ45 to RJ45 (6 ft.); RJ45 to 4-wire spade lug (6 ft.).

Retail Price:  $1,350.00


The recommended 3780 package from CTI is the CLEO 3780 Package using SYNCcable+)

Special Installation Instructions

The factory default for the Motorola 2860 modem is Bell 208b Modem (4,800 Baud) with autodialing DISABLED.  If you wish to take advantage of either the FastSync 3780 or CLEO 3780Plus AutoDial software capabilities, you must program the modem to enable the Sync Dialer.  Start by reading your 2860 Modem User Manual - read Pages 3-1 through 3-4.  The change you need to make is described on Page 3-2, Section "Operating Mode Selection."  After you get into the menu selections, you need to select "PSTN with sync dial."  After this programming change the LCD Menu Window will display the following text:

DATA IDLE MODE
SYNC DIALER

All other default settings are OK.

 

 

 

 
 

 

SyncPack and FastSync are registered trademarks of CTI Communications, a Division of Consul Tec, Inc.  Cleo, 3780Plus and SYNCcable+ are registered trademarks of Cleo Communications, a Division of DFI.  All other trademarks belong to their respective companies. Copyright 1996 - 2008 CTI Communications, a Division of Consul Tec, Inc. All Rights Reserved. CTI makes no claim or representation, and accepts no responsibility, regarding the quality, nature, connect, operability or reliability of sites accessible by hyperlink from this Web site, or sites linking to this Web site. to this Web site.